Materials: A wooden plaque, acrylic paint color of your choice (I used violet and gold glitter), foam brush, sharpie, c-shaped hooks, pencil
Step 1: Paint the wood plaque (I got mine from Joann's) with your choice of paint. I repeated this step 3 times.
Step 2: Decide on what you would like to write on your plaque and print the words on a paper using the font you like. My plaque says "My Races". Some other sayings I thought about doing was Melike's Races, Run like a Girl, Finisher, Ready-Set-Go or just Races. Use your imagination!!!
Step 3: To transfer the printed words onto the board, I used the old pencil method. Just shade the back of the printed letters with a pencil, place the word down on the wood and trace around/inside the imprinted letters with my pencil. Then, fill in the word using a sharpie as shown below. I also painted the letters with the sparkle paint to make it shiny.
Step 4: Now it is time to place your c-shaped hooks. The bibs come in two different sizes usually so, I used 4 hooks to hang both the narrow and wide sized bibs. I simply placed the bibs on the wood board and screw them in following the holes instead of measuring it with a tape.
Step 5: For the medals, I have used the same sized hooks. Although you can put the hooks directly to the wood, I used stars to make it more shiny and special. First I got some star shaped buttons from the store and painted them with the sparkle paint. Once the buttons are dried, I screwed in the hooks from one hole of the button to the wood. I didn't need to glue the stars onto the wood since the hooks kept them stable. I hided the second hole of the button by filling it in with the sparkle paint.
Step 7: VOILA!! Now, you can hand your race bibs and race bling. I have 11 bibs and 5 medals including my medal from the Vancouver Marathon hanging right now and cannot wait to add more to my collection in 2014...